Professional BYD Shark 6 Electric Brake Controller Installation in Sydney

Towing a caravan, camper trailer, boat or heavy trailer with your BYD Shark 6? Get the trailer braking system installed properly.

Sydney Auto Installs specialises in professional BYD Shark 6 electric brake controller installation throughout Sydney, including the Inner West, Eastern Suburbs, South Sydney, Western Sydney and surrounding areas.

We install and configure premium electric brake controllers including the REDARC Tow-Pro Elite V3, providing a clean, professional installation designed for modern vehicles with sophisticated electronic and safety systems.

The BYD Shark 6 is not a conventional ute. It is a high-powered plug-in hybrid with advanced vehicle electronics, regenerative braking, intelligent braking systems and extensive driver-assistance technology.

That means an electric brake controller installation needs to be done correctly.

Don't leave trailer braking to a cheap universal wiring job.

​

​

​

​

​

​

​

​

​

​

​

​

​

BYD Shark 6 Electric Brake Controller Installation

The BYD Shark 6 is built for towing.

The current Australian Shark 6 range includes:

• Shark 6 Dynamic Cab Chassis – 2,500 kg braked towing

• Shark 6 Premium – 2,500 kg braked towing

• Shark 6 Performance – 3,500 kg braked towing

BYD's current specifications confirm the 1.5-litre Dynamic and Premium models have a maximum braked towing capacity of 2,500 kg, while the 2.0-litre Shark 6 Performance increases maximum braked towing capacity to 3,500 kg.

If you're going to use that towing capability, your trailer braking system needs to be matched to the vehicle, trailer and towing requirements.

That's where a properly installed electric brake controller comes in.

REDARC Tow-Pro Elite V3 for BYD Shark 6

For customers looking for a premium electric brake controller, we recommend the REDARC Tow-Pro Elite V3.

The Tow-Pro Elite V3 provides proportional trailer braking and allows the driver to adjust trailer braking from a discreet dashboard-mounted remote.

Instead of installing a large brake controller underneath the dashboard, the Tow-Pro system allows the main control module to be mounted out of sight while the driver operates the remote control from the cabin.

Why we recommend the Tow-Pro Elite V3

• Professional, low-profile installation

• Discreet dashboard-mounted remote

• Proportional trailer braking

• Manual trailer brake override

• Suitable for modern vehicles

• Designed for 12V vehicle electrical systems

• Adjustable braking output

• Clean OEM-style installation

• Ideal for caravans, camper trailers and electric-braked trailers

The result is a braking system that gives the driver control over the trailer without putting a bulky aftermarket controller in the driver's way.

Does the BYD Shark 6 Need an Electric Brake Controller?

If your trailer uses electric brakes, the towing vehicle needs a compatible means of controlling those brakes.

In NSW, trailer braking requirements are based on the Gross Trailer Mass (GTM) of the trailer.

NSW Government guidance states:

• 0–750 kg GTM: brakes are not required

• 751–2,000 kg GTM: an efficient braking system is required on at least one axle

• 2,001–4,500 kg GTM: efficient braking is required on all wheels

• Trailers with GTM exceeding 2,000 kg must also have an automatic breakaway system

For trailers over 2,000 kg GTM, the braking system must allow the driver to operate the trailer brakes from the normal driving position.

Important: The BYD Shark 6's towing capacity does not mean you can automatically tow any trailer up to that figure. The legal towing limit is determined by the applicable vehicle, towbar, coupling, trailer, tyre and mass ratings.

Always check the actual ratings of your vehicle and trailer before towing.

BYD Shark 6 Towing: 2,500 kg or 3,500 kg?

This is an important distinction for Shark 6 owners.

BYD Shark 6 Dynamic

The 1.5-litre Shark 6 Dynamic is currently listed by BYD Australia with:

2,500 kg maximum braked towing capacity.

BYD Shark 6 Premium

The 1.5-litre Shark 6 Premium is also listed with:

2,500 kg maximum braked towing capacity.

BYD Shark 6 Performance

The newer 2.0-litre Shark 6 Performance is listed with:

3,500 kg maximum braked towing capacity.

BYD specifies these towing capacities for the Australian Shark 6 range.

If you own a Shark 6 Performance and intend to tow a large caravan, make sure you are looking at the correct vehicle specification rather than assuming the towing capacity of another Shark 6 model applies to yours.

Why a Professional Shark 6 Installation Matters

Modern vehicles are becoming increasingly complicated.

The Shark 6 combines:

• Plug-in hybrid technology

• High-voltage battery systems

• Regenerative braking

• Electronic braking systems

• Advanced driver assistance systems

• Vehicle stability control

• Electronic vehicle networks

• Multiple control modules

• Sophisticated factory wiring

An electric brake controller should therefore not simply be treated as a few wires that need to be joined together.

The brake-controller installation needs to provide the controller with the correct signals, power supply and grounding while maintaining the integrity of the vehicle's original electrical systems.

We focus on:

Correct brake signal integration

The controller needs a reliable braking signal appropriate to the vehicle.

Correct power supply

The brake controller must receive an appropriately protected power supply using correctly sized wiring and circuit protection.

Correct earthing

Poor earthing can create unreliable operation, voltage drop and inconsistent trailer braking.

Secure installation

Modules and wiring need to be properly secured away from heat, moving components, sharp edges and potential water exposure.

Clean cabin installation

The Tow-Pro remote is positioned where it is easy for the driver to access without compromising the vehicle's interior.

Testing and calibration

The installation is tested before the vehicle leaves.

BYD Shark 6 Electric Brake Controller + Towbar Setup

Already have a towbar fitted?

No problem.

We can install the electric brake controller into your existing towing setup.

We can also discuss additional towing electrical requirements including:

• Electric brake controller

• Trailer brake wiring

• Trailer socket wiring

• Anderson plug installation

• Trailer power supply

• Caravan electrical connections

• Trailer battery charging circuits

• Tow vehicle electrical upgrades

• Brake controller testing

• Trailer brake calibration

If you're setting up a Shark 6 specifically for caravan touring, we can look at the towing electrical system as a complete package rather than treating the brake controller as an isolated component.

BYD Shark 6 Caravan Brake Controller Installation

The Shark 6 is particularly attractive to caravan and camper-trailer owners because of its combination of power, AWD capability and hybrid technology.

But towing a large caravan changes the demands placed on the vehicle.

The trailer needs to contribute to the braking process.

A correctly installed electric brake controller allows the driver to control the trailer's electric brakes from the towing vehicle.

This can help provide more controlled braking and reduce the amount of braking demand placed solely on the tow vehicle.

For large caravans, the importance of correctly functioning trailer brakes becomes even greater.

BYD Shark 6 Electric Brakes — Don't Cheap Out on the Installation

There is a big difference between:

"Someone can wire it."

and

"Someone understands modern vehicle electrical systems."

The Shark 6 is an advanced hybrid vehicle.

Your electric brake controller should be installed with the same level of care you would expect from the rest of the vehicle.

A poorly executed installation can result in:

• Unreliable trailer braking

• Poor braking response

• Electrical faults

• Voltage drop

• Loose or exposed wiring

• Poorly protected circuits

• Interference with vehicle systems

• An untidy dashboard installation

We believe a brake controller installation should look like it belongs in the vehicle.

Clean wiring. Proper protection. Secure mounting. Correct testing. No shortcuts.

Mobile BYD Shark 6 Brake Controller Installation Sydney

Don't waste half a day sitting in a workshop.

Sydney Auto Installs provides a mobile auto electrical service, allowing us to come to your home, workplace or another suitable location throughout Sydney.

We service customers across:

• Sydney Inner West

• Eastern Suburbs

• South Sydney

• St George

• Canterbury-Bankstown

• Western Sydney

• Northern Sydney

• Hills District

• Sutherland Shire

• Greater Sydney

If you're preparing a new BYD Shark 6 for a caravan, camper trailer or work trailer, we can arrange the electric brake controller installation around your schedule.

BYD Shark 6 Redarc Tow-Pro Elite V3 Installation

For Shark 6 owners wanting a premium brake controller, the REDARC Tow-Pro Elite V3 is one of our preferred solutions.

The system combines a hidden main module with a compact dashboard control, giving you a factory-style appearance while retaining control over your trailer brakes.

We can supply and install the system and configure it for your towing requirements.

Ask us about a BYD Shark 6 Tow-Pro Elite V3 installation.

What Is Included in a BYD Shark 6 Brake Controller Installation?

A professional installation may include:

• REDARC Tow-Pro Elite V3

• Tow-Pro remote control

• Controller mounting

• Vehicle brake signal connection

• Dedicated power supply

• Correct circuit protection

• Correct earth connection

• Trailer brake output wiring

• Secure routing of wiring

• Dashboard remote installation

• Electrical testing

• Trailer brake testing

• Controller adjustment and calibration

The exact installation method and components required can vary depending on the vehicle specification, towbar, trailer wiring and existing electrical equipment.

BYD Shark 6 Brake Controller Installation — Sydney Auto Installs

At Sydney Auto Installs, we specialise in automotive electrical installations for modern vehicles.

Our services include:

• Electric brake controllers

• Caravan electrical systems

• Anderson plugs

• Trailer wiring

• Dash cameras

• UHF radios

• Dual battery systems

• GPS tracking

• 4WD electrical accessories

• Vehicle accessory installations

We are a licensed motor vehicle repairer and provide mobile auto electrical installation throughout Sydney.

Licence: MVTC143049

Why Choose Sydney Auto Installs?

Qualified Automotive Electrical Experience

Electric brake controllers are safety-critical equipment.

We don't treat them like a simple accessory installation.

Mobile Sydney Service

We come to you at your home or workplace where practical.

Clean Installation

Our objective is an OEM-style finish with properly secured and protected wiring.

Modern Vehicle Experience

Today's vehicles use complex electronic systems and communication networks. Our installations take those systems into account.

Premium Components

We favour quality equipment from established automotive electrical manufacturers.

Testing

The installation is checked before completion so you can tow with confidence.

Ready to Fit Your BYD Shark 6 for Towing?

If your Shark 6 is heading out with a caravan, camper trailer, boat or electric-braked trailer, make sure the towing electrical system is properly installed before you leave.

Book your BYD Shark 6 electric brake controller installation with Sydney Auto Installs.

Call 0411 194 703

Or contact us to discuss your Shark 6, trailer and towing requirements.

Sydney Auto Installs — Professional Mobile Auto Electrical Services Sydney

BYD Shark 6 Electric Brake Controllers | REDARC Tow-Pro Elite V3 | Caravan & Trailer Electrical